Zitat
Original geschrieben von Sesamstraße
ich habe ganz viel zu den beiden Modellen recherchiert
Ungenügend, sechs, setzen 
RTFM 
MFC-7440N
Empfangsmodi
verwenden 6
Wenn Nur Fax oder Fax/Tel eingestellt ist,
werden Anrufe vom Gerät automatisch angenommen.
Für diese Modi können Sie die
Anzahl der Klingelzeichen, nach denen das
Gerät antwortet, einstellen. (Lesen Sie dazu
Klingelanzahl auf Seite 41.)
Nur Fax 6
Wenn Nur Fax eingestellt ist, werden alle
Anrufe vom Gerät automatisch als Faxanruf
angenommen.
Fax/Tel 6
Die Einstellung Fax/Tel sollten Sie verwenden,
wenn Sie Telefonanrufe und Faxe
erwarten. Das Gerät beantwortet jeden Anruf
automatisch und erkennt, ob es sich um einen
Fax- oder Telefonanruf handelt:
􀂄 Faxe werden automatisch empfangen.
􀂄 Bei einem Telefonanruf gibt das Gerät das
F/T-Klingeln (Doppelklingeln) aus, um Sie
ans Telefon zu rufen.
(Siehe auch F/T-Rufzeit (nur Fax/Tel-Modus)
auf Seite 41 und Klingelanzahl auf Seite 41.)
Manuell 6
Wenn Manuell eingestellt ist, beantwortet
das Gerät keine Anrufe.
Um ein Fax zu empfangen, drücken Sie
Start, wenn Sie den Faxton hören. Sie können
auch die automatische Fax-Erkennung
einschalten, damit das Gerät Faxe auch dann
automatisch empfängt, wenn der Anruf über
ein externes Telefon angenommen wurde.
(Siehe auch Fax-Erkennung auf Seite 41.)
Samsung SCX-4824FN
Receiving automatically in Fax mode
Your machine is preset to Fax mode at the factory. When you receive a fax,
the machine answers the call on a specified number of rings and
automatically receives the fax.
To change the number of rings, see page 51.
Receiving manually in Tel mode
You can receive a fax call by pressing On Hook Dial and then pressing
Start when you hear a fax tone from the remote machine.
The machine begins receiving a fax and returns to ready mode when the
reception is completed.
Receiving manually using an extension telephone
This features works best when you are using an extension telephone
connected to the EXT socket on the back of your machine. You can receive
a fax from someone you are talking to on the extension telephone without
going to the fax machine.
When you receive a call on the extension phone and hear fax tones, press
the keys *9* on the extension phone. The machine receives the fax.
Press the buttons slowly in sequence. If you still hear the fax tone from the
remote machine, try pressing *9* once again.
*9* is the remote receive code preset at the factory. The first and the last
asterisks are fixed, but you can change the middle number to whatever you
wish. For details about changing the code, see page 51.
Receiving automatically in Ans/Fax mode
To use this mode, you must attach an answering machine to the EXT socket
on the back of your machine.
If the caller leaves a message, the answering machine stores the message
as it would normally. If your machine detects a fax tone on the line, it
automatically starts to receive the fax.
Receiving faxes using DRPD mode
Distinctive Ring is a telephone company service which enables an user to
use a single telephone line to answer several different telephone numbers.
The particular number someone uses to call you is identified by different
ringing patterns, which consist of various combinations of long and short
ringing sounds. This feature is often used by answering services who
answer telephones for many different clients and need to know which
number someone is calling in on to properly answer the phone.
Using the Distinctive Ring Pattern Detection (DRPD) feature, your fax
machine can learn the ring pattern you designate to be answered by the fax
machine. Unless you change it, this ringing pattern will continue to be
recognized and answered as a fax call, and all other ringing patterns will be
forwarded to the extension telephone or answering machine plugged into
the EXT socket. You can easily suspend or change DRPD at any time.
Before using the DRPD option, Distinctive Ring service must be installed on
your telephone line by the telephone company. To set up DRPD, you will
need another telephone line at your location, or someone available to dial
your fax number from outside.
To set up the DRPD mode:
1. Press Fax.
2. Press Menu until Fax Setup appears on the bottom line of the display
and press OK.
3. Press the left/right arrow until Receiving appears and press OK.
4. Press the left/right arrow until DRPD Mode appears and press OK.
Waiting Ring appears on the display.
5. Call your fax number from another telephone. It is not necessary to
place the call from a fax machine.
6. When your machine begins to ring, do not answer the call. The machine
requires several rings to learn the pattern.
When the machine completes learning, the display shows Completed
DRPD Setup. If the DRPD setup fails, Error DRPD Ring appears.
Press OK when DRPD Mode appears and start over from step 4.
7. Press Stop/Clear to return to ready mode.
Receiving in secure receiving mode
You may need to prevent your received faxes from being accessed by
unauthorized people. You can turn on secure receiving mode to restrict
printing of received faxes when the machine is unattended. In secure
receiving mode, all incoming faxes go into memory. When the mode is
deactivated, any stored faxes are printed.
• If you have set your machine to Ans/Fax mode and your
answering machine is switched off, or no answering machine is
connected to EXT socket, your machine automatically goes into
Fax mode after a predefined number of rings.
• If your answering machine has a user-selectable ring counter, set
the machine to answer incoming calls within 1 ring.
• If you are in Tel mode (manual reception) when the answering
machine is connected to your machine, you must switch off the
answering machine, or the outgoing message from the answering
machine will interrupt your phone conversation.