I am trying to replace the front cover of my 6310,
also after removing the 4 screws under the battery,
the top site of fone is still kept together strongly.
Looking at the newly bought cover to be replaced,
I can see 3 plastic clips and one more screw nut in
this particular area. Does any body know how to
get the old cover off without braking anything.
Thank you very much 
Nokia 6310 Front Cover wechseln
-
-
In this link you will find the pictures and you can read how it works ..
sorry my english is not so good :o
Switch mobile telephone off before opening. Akku and SIM map take. Now the 4 screws (marked in the picture red) with a Torx-6-Schraubendreher loosen.
At the top side (antenna/IR interface) the two gehaeuseteile are held together additionally with 3 bolting devices. The release of these bolting devices succeeds best, if one rotates and then takes the two gehaeuseteile apart easily against each other. If the lower shell is removed, still another further screw at the antenna (see red marking in the following picture) must be loosened. Subsequently, the printed circuit board can be taken.
-
Thanks for your help sway-67,
I have managed to change the front cover now
Oskarm -
its perfect :top:
thanks sway
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!